Menu List; 1: Video Input - Roland V-8HD Reference Manual

Menu List

When you press the [MENU] button, the menu is shown on this unit's monitor and on the display that's connected to the OUTPUT 3 connector.

1: VIDEO INPUT

INPUT 1–6
Menu item Value
INPUT STATUS ENTER
INPUT ASSIGN HDMI, STILL 1–8
FLIP H OFF, ON
OFF, ON
FLIP V
BRIGHTNESS
-32–0–31
CONTRAST -32–0–31
SATURATION -32–0–31
INPUT 7, 8 (SCALER)
Menu item Value
INPUT STATUS ENTER
INPUT ASSIGN HDMI, STILL 1–8
FLICKER FILTER OFF, ON
FLIP H OFF, ON
OFF, ON
FLIP V
INTERNAL
SVGA (800x600)
XGA (1024x768)
WXGA (1280x800)
FWXGA (1366x768)
SXGA (1280x1024)
EDID
SXGA+ (1400x1050)
UXGA (1600x1200)
WUXGA (1920x1200)
720p
1080i
1080p
ZOOM 10.0–100.0–1000.0% (*1)
Explanation
(Bold: default)
Displays information about the incoming video (format, size, etc.).
Selects the input source.
If this is "ON, " the video is input with left and right flipped.
If this is "ON, " the video is input with top and bottom flipped.
Adjusts the brightness.
Adjusts the contrast.
Adjusts the saturation.
Explanation
(Bold: default)
Displays information about the incoming video (format, size, etc.).
Selects the input source.
If this is "ON, " flickering is reduced.
If this is "ON, " the video is input with left and right flipped.
If this is "ON, " the video is input with top and bottom flipped.
Specifies the input format (EDID).
If this is "INTERNAL, " EDID information for all formats that can be input to the V-8HD will
be transmitted.
What is EDID?
EDID is data that is transmitted from the V-8HD to the source device when the V-8HD is
connected to a source device. EDID contains data such as the formats that can be input
to the V-8HD (resolution, color space, color depth) and audio information.
Based on the EDID information that the source device receives, it will output the most
appropriate video format to the V-8HD.
Adjusts the zoom ratio.
MEMO
5 When a setting value has menu items that let you make
more-detailed settings, "ENTER" is displayed at the top of
the screen. Press the [VALUE] knob to go down a level.
5 To execute an operation, press the [VALUE] knob.
5 You can change a setting value rapidly by holding down
the [VALUE] button and turning.
5 Long pressing the [EXIT] button returns the currently
selected setting to its default value.
65