Table of Contents
Advertisement
Setup Menu
You can display menus on a multi-view monitor connected to the V-1200HD and use them to make various settings.
Using the Menus
Menu operations follow the procedure described below.
1.
Connect a monitor to the HDMI OUT MULTI-VIEW 2
connector.
The setup menu appears on the monitor connected to HDMI OUT
MULTI-VIEW 2.
2.
Display the menu.
Press the [MENU] button to display the menu.
Menu Organization
The V-1200HD's menus are organized as shown below.
Menu item
Description
System
Displays the program version information.
This saves a settings file on a USB flash drive or deletes a settings
Backup
file saved on a USB flash drive.
Restore
Loads a settings file saved on a USB flash drive.
Format
Formats a USB flash drive.
Factory Reset
Returns the unit's settings to their factory defaults.
26
3.
Select the target menu.
Use the [DEC] and [INC] buttons to select the desired menu item,
then press the [ENTER] button.
The items belonging to the selected menu are displayed.
* For information on where to look for explanations of the items
and to find out about operation procedures, refer to "Menu
Organization" below.
4.
Exit the menu.
When the item operations end, press the [MENU] button several
times to quit the menu.
Section to see
"Checking the Version Information" (p. 30)
"Saving a New Settings File (Save As)" (p. 30)
"Saving Settings by Overwriting" (p. 30)
"Deleting Settings" (p. 30)
"Recalling Settings" (p. 30)
"Formatting a USB Flash Drive" (p. 30)
"Returning Settings to the Factory-Default
State (Factory Reset)" (p. 30)
Advertisement
Table of Contents
