Setting The Copyright Notice; Checking The Firmware Version - Ricoh GR II Operating Manual

Setting the Copyright Notice

You can set a copyright notice to be written as Exif data when images are
taken.
1
Select [Copyright Notice] in the [Setup] menu, and then press
the $ button.
The [Copyright Notice] screen appears.
2
Press the " button.
The cursor moves to the character selection
area.
3
Press the !"#$ buttons to select a character, and then press
the MENU/OK button.
You can enter up to 46 alphanumeric characters.
The character type can be changed with the Fn2 button.
4
Press the ADJ. lever.
The copyright notice is registered, and then the [Setup] menu reappears.
Note -----------------------------------------------------------------------------------------------------------
• A copyright notice that has been written to an image can be checked in the detailed information
displayed on the playback screen.

Checking the Firmware Version

You can view the camera firmware version in [Confirm Firmware Version] of
the [Setup] menu. When there is a firmware file on the memory card, you can
update the firmware.
For information on version updates, check the RICOH IMAGING website.
http://www.ricoh.com/r_dc/support/
3
129