Displaying The Local Date And Time Of The Specified City - Ricoh Pentax K-1 Operating Manual

4
After entering the text, move the text selection
cursor to [Finish], and press E.
The [Rename USER Mode] screen reappears.
Using the Saved USER Mode
1
Set the mode dial to O to 5.
The USER mode name is
displayed.
Use AB to check the saved
settings.
2
Change the settings as necessary.
6
The exposure mode can be
changed in [Exposure Mode]
of the A1 menu.
t Memo
• The settings changed in Step 2 are not saved as the USER
mode settings. When the camera is turned off, the camera
returns to the originally saved settings. To change the original
settings, save the USER mode settings again.
102
The date and time set at the time of initial setting ("Initial
Settings" (p.36)) serve as the date and time of your present
location and are reflected in the shooting date and time for
images.
Setting the destination to a location other than your present
location enables you to display the local date and time
ABCDEFGHIJKLMNOPQR ABCDEFGHIJKLMNOPQR
2 5 0 2 5 0 5.6 5.6
F F
1/ 1/
on the monitor when traveling abroad and also save images
1 6 0 0 1 6 0 0
time-stamped with the local date and time.
1
2
Exposure Mode Exposure Mode
Exposure Mode Exposure Mode
Program Line Program Line
Cancel Cancel OK OK
3
4
5
6
7
Displaying the Local Date and Time
of the Specified City
Select [World Time] in D1 menu.
The [World Time] screen appears.
Select the time you wish to
display in [Time Setting].
F (Hometown) or
G (Destination) can be selected.
Select [G Destination] and press D.
The [G Destination] screen appears.
Use CD to select a city.
Use R to change the region.
Select [DST] (daylight saving time), and use CD
to select Y or Z.
Press E.
The screen of Step 2 reappears.
Press F twice.
D1
World Time World Time
Time Setting Time Setting
Destination Destination
London London 16:00 16:00
Hometown Hometown
New York New York 10:00 10:00
Destination Destination
London London +6:00 +6:00
DST DST 16:00 16:00
Cancel Cancel OK OK