Panasonic CS-VE9NKE Service Manual page 98

16.1.4 Removing the Control Board Box
1 Perform "16.1.1 Removing the Front Panel".
2 Perform "16.1.3 Removing the Front Grille (Right) and Front Grille (Left)".

Note on disassembly: When removing only the control board box, remove the front grille (right) only.
3 Remove the electrical component cover (front) on the right side of the control board box. (There are 2 tabs on
top and 1 tab at the bottom.)
4 Remove the screw (1 piece) at the bottom of the control board and then pull the power-supply box towards
you.
5 Disengage the tabs (3 locations) which fix the electrical component cover (rear) to the power-supply box.
Then, remove the electrical component cover (rear) on the right side of the power-supply box.
98