Panasonic CS-VE9NKE Service Manual page 103

4 Disconnect the connector CNSTM4 (blue) connected to the control board.

How to remove the control board (signal receptor)
1 Disconnect the connectors (3 locations) and disengage the tabs (3 locations) on the control board (signal
receptor). Then, remove the control board (signal receptor).

How to remove the control board (indicator)
1 Disengage the tabs (2 locations) on the plastic indicator cover.
2 Flip the plastic indicator cover and disengage the tabs (5 locations).
3 Disconnect the connector (1 location) on the control board (signal receptor).
4 Disconnect the connectors (2 locations) on the control board (indicator) and remove the control board
(indicator).
103