Panasonic CS-VE9NKE Service Manual page 108

9 Remove the horizontal louver (left) drive motor.
Remove the drive motor fixing screw (1 piece) on the right side of the blowout grille.
o
Push the drive motor fixing tab (1 location) towards the direction indicated by the arrow to disengage it.
o
10 Release the lever from the horizontal louver and remove the drive motor. (A lever is connected to the
horizontal louver drive motor (both right and left).
Press the stopper of the lever and pull the horizontal louver connecting lever towards you to release the
o
lever from the horizontal louver.
16.1.13 Removing the Indoor Motor and Cross Flow Fan
1 Perform "16.1.1 Removing the Front Panel".
2 Perform "16.1.2 Removing the Air Filters".
3 Perform "16.1.3 Removing the Front Grille (Right) and Front Grille (Left)".
4 Perform "16.1.4 Removing the Control Board Box".
5 Perform "16.1.8 Removing the Air Filter Frame (Auto Cleaner)".
6 Perform "16.1.11 Removing the Blowout Grille".
7 Remove the screws (2 pieces) on the left side of the heat exchanger.
108