Panasonic CS-VE9NKE Service Manual page 101

6 Disengage the tabs (5 locations) which fix the control board and then remove the control board.
16.1.6 Removing the Control Board (Emergency Operation Switch and Buzzer)
1 Perform "16.1.1 Removing the Front Panel".
2 Perform "16.1.3 Removing the Front Grille (Right) and Front Grille (Left)".

Note on disassembly: When removing only the control board (emergency operation switch and buzzer),
remove the front grille (right) only.
3 Remove the electrical component cover (front) on the right side of the control board box. (There are two tabs
on top and one tab at the bottom.)
4 Disconnect the connector CN-SWSEN (white) connected to the control board.
5 Press the tab (1 location) on top of the control board (emergency operation switch & buzzer) and remove the
control board (emergency operation switch and buzzer).
101