Scan To Pc; Transfer Protocol (Selecting A Transfer Protocol) - Fuji Xerox ApeosPort-IV C5575 User Manual

5 Scan

Scan to PC

This section describes the procedure to select features on the [Scan to PC] screen. The Scan
to PC service allows you to scan documents and send the scanned data to a network
computer via the FTP or SMB protocol. The following describes features available on the
[Scan to PC] tab. The following shows the reference section for each feature.
Note
5
You can customize the layout of the features displayed on the [Scan to PC] screen. For more information, refer to "5 Tools"
> "Scan Service Settings" > "Screen Defaults" > "1st Tab - Features Allocation" in the Administrator Guide.
You can set [First Tab] or [Address Book] for the screen displayed when you select [Scan to PC] on the [Service Home] screen.
For more information, refer to "5 Tools" > "Scan Service Settings" > "Screen Defaults" > "Scan to PC Screen Default" in the
Administrator Guide.
1
Select [Scan to PC] on the [Services Home]
screen.
2
Select a feature on the [Scan to PC] screen.
Note

Transfer Protocol (Selecting a Transfer Protocol)

You can select a transfer protocol using the following procedure.
302
Transfer Protocol (Selecting a Transfer Protocol)................................................................................................................ 302
Address Book (Specifying a Destination PC Using the Address Book)............................................................................ 303
Add New Address (Registering a Destination PC on the Address Book) ........................................................................ 305
Specifying a Destination PC Using a One Touch Button.................................................................................................... 308
Browse (Specifying a Destination PC by Browsing Your Network) .................................................................................. 309
Specifying a Destination (Specifying a Destination PC Using the Screen Keyboard)................................................. 310
Preview (Previewing the Scanned Images during a Scan Job) ......................................................................................... 312
Color Scanning (Selecting an Output Color) ......................................................................................................................... 312
2 Sided Scanning (Scanning Both Sides of a Document) .................................................................................................. 312
Original Type (Selecting the Document Type)...................................................................................................................... 312
File Format (Selecting a File Format for Output Data)....................................................................................................... 312
• Before scanning, you must create a shared folder on your computer to save scanned data in.
Furthermore, if you use the FTP protocol, you must set the FTP service. For information on the
computer settings, refer to the documentation provided with your operating system. For
information on how to configure the FTP settings on Mac OS X v10.7 Lion, refer to the official
website of Apple, Inc.. For information on supported operating systems, refer to "16 Appendix" >
"Specifications" in the Administrator Guide.
• If you use Mac OS X v10.7 Lion, contact our Customer Support Center to ask if it is supported.
• Depending on the settings for [Save to PC
Screen Default] in the System Administration
mode, the [Server Address Book] screen is
displayed. For more information, refer to "5
Tools" > "Scan Service Settings" > "Screen
Defaults" > "Save to PC Screen Default" in the
Administrator Guide.
• Fields displayed on the screen vary
depending on the protocol you have selected.