Staple - Fuji Xerox ApeosPort-IV C5575 User Manual

Note
For information on how to copy four or eight pages of a document together onto a single sheet of paper, refer to "Pages per
Side (Copying Multiple Pages onto One Sheet)" (P.131).
1
Select [2 Pages per Side].

1 Staple

This feature allows you to select whether to staple copied outputs at the top left corner.
The number of sheets that can be stapled is 2 - 50 (when 80 gsm paper is used). Available
paper types are: Bond, Plain, Recycled, Plain Reload, Lightweight, Heavyweight,
Heavyweight Reload, Extra Heavyweight (170 - 220 gsm), Extra Heavyweight (170 - 220
gsm) Reload, Gloss*, Gloss Reload*, Heavyweight Gloss (170 - 220 gsm)*, Heavyweight Gloss
(170 - 220 gsm) Reload*, Punched, and Custom Paper 1 to 5.
* : The paper types unavailable for Finisher-A1
Note
1
Select [1 Staple].
• When you deselect [Auto %] in [Reduce/Enlarge] (when you select another copy ratio), image loss
may occur depending on the image size of the document.
• Select a tray other than [Auto Select] in [Paper Supply]. When you select [Auto Select], the tray
containing A4 paper is selected. If no tray contains A4 paper, the machine select a tray based on the
[Auto Paper Off] setting. For information on [Auto Paper Off], refer to "5 Tools" > "Copy Service
Settings" > "Copy Control" > "Auto Paper Off" in the Administrator Guide.
• When you copy both sides of the 2-sided document to one side and the document size is bigger
than A4, the orientation of the copied images may not be appropriate. To achieve the copy result
with the correct orientation, scan Side 1 and Side 2 separately in different orientations, using the
document glass.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Simple Copy
3
89