3
3
Touch [Position], and then touch the button for the desired position.
–
Touch [Auto] to automatically determine the position of the
punched holes according to the orientation of the positioned origi-
nal. If the original length is 11-11/16 in. or less, the holes are
punched along the long side of the paper. If the original length is
more than 11-11/16 in., the holes are punched along the short side
of the paper.
–
To cancel changes to the punched hole position, touch [Cancel].
4
Touch [OK] twice.
The Basic screen appears again.
3-74
Basic Copy Operations
bizhub 750/600