Konica Minolta bizhub 750 User Manual page 176

Basic Copy Operations
2
Under "Staple", touch either [Corner] or [2 Position].
– To cancel the Staple settings, touch [Corner] or [2 Position] again to
deselect it.
– To cancel changes to the settings, touch [Cancel].
– To change the output tray, touch [Select Output Tray] and select
the output tray.
3
Touch [Position], and then touch the button for the desired position.
– To cancel changes to the settings, touch [Cancel].
– Touch [Auto] to automatically determine the stapling position ac-
cording to the orientation of the loaded original. If the original
length(X) is 11-11/16 in. or less, the long side of the paper is sta-
pled. If the original length(X) is more than 11-11/16 in., the short
side of the paper is stapled.
4
Touch [OK] twice.
The Basic screen appears again.
bizhub 750/600
3
3-71