Konica Minolta bizhub 750 User Manual page 487

12
Parameter
Offset by Each Job Set-
ting
Preset Characters Set-
tings
Note
[Print/Fax Output Setting] appears only if optional image controller IC-
202 is installed.
The "Exit Tray Setting" parameter is available only if optional finisher FS-
504/FS-505/FS-602 is installed.
Date/Time Setting
Description
Specify the date, time and time zone for the machine's internal clock.
Daylight Saving Time Setting
Description
Select whether or not the machine's internal clock observes daylight
saving time, and specify the daylight saving time.
Weekly Timer Setting
Parameter
Weekly Timer ON/OFF
Setting
Time Setting
Date Setting
12-32
Description
Select whether or not printed copies are
fed out shifted when "Offset" is selected
while finisher FS-504/FS-505/FS-602 is
installed.
• ON:
Pages are fed out shifted.
• OFF:
Pages are fed out without being shift-
ed.
Save and specify the text printed as a watermark during printing. For
details, contact your technical representative.
Description
Select whether or not the weekly timer is
used.
Specify the time of each day that the ma-
chine is turned on/off by the timer.
Specify the individual dates or the days
of the week that the machine is turned
on/off by the timer.
Utility
Settings (Default set-
tings are underlined.)
ON/ OFF
Settings (Default set-
tings are underlined.)
Time Zone: -12:00 to
13:00 00:00
Settings (Default set-
tings are underlined.)
ON/ OFF
Daylight Savings Time: 1
to 150 minutes: 60 min-
utes
Settings (Default set-
tings are underlined.)
ON/ OFF
–
–
bizhub 750/600