Post Inserter Tray Size - Konica Minolta bizhub 750 User Manual

Utility

Post Inserter Tray Size

Adjust the post inserter tray size if the paper cannot be detected correctly.
0 This parameter is available only if post inserter PI-501 is installed.
1
Display the Administrator Setting screen.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [7 Post Inserter Tray Size].
The Post Inserter Tray Size screen appears.
6
Touch the button for the paper tray to be adjusted.
7
Load A4 w -size paper into the selected paper tray.
8
Press the [Start] key.
– Adjust the post inserter tray.
9
To adjust the other paper tray, repeat steps 6 through 8.
10
Touch [Close].
– The Finisher Adjustment screen appears again.
bizhub 750/600
12
12-79