Konica Minolta bizhub 750 User Manual page 76

Before Making Copies
5
Specify any necessary copy settings.
6
Press the [Start] key.
The original is scanned, and the job is added to the list of queued jobs.
7
Check that the original has finished being scanned, and then position
the next original.
8
Specify new copy settings and the desired number of copies, and then
press the [Start] key.
– After the machine has finished warming up, the jobs will automati-
cally be printed in the order that they were queued.
How is the printing of a job stopped?
?
% Press the [Stop] key. For details, refer to "Stopping Scanning/Print-
ing" on page 3-86.
!
Detail
While the machine is warming up to begin printing after it is turned on us-
ing the sub power switch, copy settings can be specified and an original
can be scanned to reserve a copy job.
After the machine has finished warming up, the scanned image will be
printed.
The machine takes about 5 minutes (bizhub 750)/4 minutes 30 seconds
(bizhub 600) to warm up at normal room temperature (68°F) when the
control panel is turned on using the sub power switch after the machine
is turned on using the main power switch.
The output order can be changed or jobs can be deleted from the Current
Jobs list of the Job List screen. For details, refer to "Managing Jobs (Job
List)" on page 11-2.
bizhub 750/600
2
2-27