Buderus Logamax plus GB162 Technical Manual page 90

8 Installation
Connection accessories for the Logamax plus GB162-15/25/35 and GB162-25 T40S
Designation
DHW cylinder accessories for the sanitary side for S120 W, S135 RW and S160 RW
S-Flex
Flexible connection set for the
sanitary side
DHW circulation set
S135 RW/S160 RW
U-DM
Pressure reducer
ZP
DHW circulation pump
connection
For GB162-25 T40S sanitary side
Safety assembly, cold water,
8 bar
Accessories; optional
G-BL 135
Decorative cover
Safety valve 4 bar
Table 31 Connection accessories Logamax plus GB162-15/25/35 and GB162-25 T40S
(assignment
90
tab. 30; installed dimensions
Description
• For DHW cylinders S120 W, S135 RW and S160 RW
• Flexible corrugated hoses with thermal insulation and
gaskets for cold water and DHW
• Safety assembly with shut-off valve, non-return valve and
10 bar safety valve
• Elbow fittings G¾ × Rp¾ for corrugated cold water
and DHW hoses on the cylinder side
• Threaded nipples for connecting the corrugated cold
water and DHW hoses on the wall side (finished walls)
• For the connection of a DHW circulation pump
• In conjunction with S135 RW and S160 RW
• Elbow fitting G¾ × Rp¾
• DHW circulation pipe
• Gasket
• Retrofit in the S-Flex
• Pressure reducer to 4 bar
• In conjunction with S120 W
• For the connection of a DHW circulation pump
• For retrofitting with S-Flex
• Connection elbow fitting
• Reducer
• Gaskets
• Safety valve 8 bar
• Non-return valve
• Drain with 1 m hose
• Optional cold water shut-off
• To cover up the connections on the gas side and the
water side when installing a DHW cylinder S135 RW or
S160 RW below
• Installation on finished walls
• Colour: light grey
• For installation inside the appliance
• Conversion to 4 bar operating pressure
page 27 to page 29)
6 720 645 821 (2010/09) – Logamax plus GB162