Buderus Logamax plus GB162 Technical Manual page 89

Connection accessories for the Logamax plus GB162-15/25/35 and GB162-25 T40S
Designation
Accessories for external DHW cylinders
AS-E
Cylinder connection set
For S120 W below
U-Flex
Pipework set for the heating
circuit side
For S135 RW and S160 RW below
U-Flex
Pipework set for the heating
circuit side
Decorative side cover for
S135 RW
Decorative side cover for
S160 RW
For SU160 W, SU200 W and SU300 W adjacent
N-FlexFlexible pipework set
for the heating circuit side
Table 31 Connection accessories Logamax plus GB162-15/25/35 and GB162-25 T40S
(assignment
6 720 645 821 (2010/09) – Logamax plus GB162
tab. 30; installed dimensions
Description
• DHW temperature sensor Ø 6 mm for DHW heating,
with plug for connection to the terminal strip inside the
gas condensing boiler
• Including ¼ -circle sensor segments (dummy segments)
and tensioning spring (plastic spiral) for temperature
sensor Ø 6 mm in conjunction with DHW cylinders larger
than 120 l
• Plug for cylinder primary pump and DHW circulation
pump
• For S120 W DHW cylinders below
• Installation on finished walls
• Flexible corrugated hose with thermal insulation and
gaskets for DHW cylinder flow and return
• Elbow fittings G¾ × G¾
• For S135 RW and S160 RW DHW cylinder below
• Installation on finished walls
• Flexible corrugated hose with thermal insulation and
gaskets for DHW cylinder flow and return
• Elbow fittings G¾ × G¾
• Installation on the side towards the back of the cylinder
• Decorative cover to conceal pipework
• Installation on finished walls
• Installation on the side towards the back of the cylinder
• Decorative cover to conceal pipework
• Installation on finished walls
• For DHW cylinders SU160 W, SU200 W and
SU300 W, adjacent
• Installation on finished walls
• One short and one long flexible corrugated hose with
thermal insulation, gaskets and fittings G1 × G¾ for
DHW cylinder flow and return
• Elbow fittings G1 × G1
page 27 to page 29)
Installation 8
89