Buderus Logamax plus GB162 Technical Manual page 88

8 Installation
Connection accessories for the Logamax plus GB162-15/25/35 and GB162-25 T40S
Designation
Accessories; heating circuit and gas connection
HKA
Heating circuit connection set
GB-BS
Straight-through gas tap
G-TA
Drain outlet kit
G-KS
"
"Short circuit line
MAG
Expansion vessel
Wall mounting bracket for
MAG
Cap valve
(Not required if the AAS
connection set is used)
AAS
Connection set for MAG
Dirt filter (heating system)
Table 31 Connection accessories Logamax plus GB162-15/25/35 and GB162-25 T40S
(assignment
88
tab. 30; installed dimensions
Description
• 2 service ball valves Rp1
• Tee with cap for connecting an external MAG
• Tee with drain & fill valve
• 2 fittings Rp1
• Installation on finished walls
• R½
• Installation on finished walls
• With integral fire protection
• Siphon R1 complete with discharge pipe and bezel
• Required during installation if no DHW cylinder is
connected
"
• "Short circuit line with union nuts
• Gaskets
• Rated capacity 18 l, 25 l, 35 l and 50 l
• Installation on site
• Colour: white
• For MAG 18/25
• PN10
• For MAG ¾ "
• Flexible stainless steel hose ¾ ", 1 m long
• Cap valve for expansion vessel
• Gaskets
• Drain & fill valve
• For MAG ¾ " or 1"
• For installation in the heating return
• Filter unit 500 μm
• With stainless steel mesh core
• Rp1 flow rate < 3200 l/h
• Rp1¼ flow rate < 5000 l/h
page 27 to page 29)
6 720 645 821 (2010/09) – Logamax plus GB162