Call Fwd All - Outside Line - AT&T SB67030 User Manual

Call Fwd All - Outside Line

To set Call Forward All to go to an outside line:
Call Forward All
Call Fwd All Target
to Ext:
to Line:
Use or to mov e highlight.
Use or to cy cle through options.
Save
Figure 43. Call Forward All - Line
Call Forward All
Call Fwd All Target
to Ext: 200
to Line: 604-555-0131
Use or to mov e highlight.
Use or to cy cle through options.
Save Delete BackSpc
Figure 44. Call Forward Line
Settings
AT&T SB67030 Deskset User's Guide
1. Press MENU to display the Menu screen shown in
2. Press 2 on the dial pad to display the User Settings menu shown in
Line
page 39.
3. Press 2 to display the Call Forward All menu shown in Figure 43.
4. Press the
5. Press the
Quick
Dial
number field. A preceding 9 is not necessary since the call is already marked as
an external call.
6. Enter a valid external phone number, as shown in Figure 44.
7. To confirm the change, press
[Line]
Calls can be forwarded to a non-system telephone, via the PSTN lines plugged
into the Gateway, only if Call Fwd/Transfer to an outside line is enabled in the
Admin Settings. If not, an error screen appears.
Activating Call Forward All redirects the call to the assigned phone number.
The Deskset does not ring but a message screen appears to confirm that the
Quick
Dial
call was forwarded. The Deskset does not record the call in the Call Log. The
caller ID information sent with the forwarded call will be your company phone
number.
or navigation key to change the setting to
navigation key to move to the to Line: field. A cursor appears in the
. The User Settings menu displays.
46
Figure 24 on page 34.
Figure 31 on
.