Post Beep Codes - IBM Netfinity 4500R User Reference Manual

POST beep codes

Beep code
1-1-2
1-1-3
1-1-4
1-2-1
1-2-2
1-2-3
1-4-3
2-1-1
2-1-2
2-1-3
2-1-4
2-2-1
2-2-2
2-2-3
2-2-4
2-3-2
2-3-3
2-3-4
2-4-1
3-1-1
3-1-2
3-1-3
3-1-4
3-2-1
3-2-2
3-2-3
3-2-4
2-3-1
3-3-2
Table 14. POST beep codes
Description
Microprocessor register test has failed.
CMOS write/read test has failed.
BIOS ROM checksum has failed.
Programmable Interval Timer test has failed.
DMA initialization has failed.
DMA page register write/read test has failed.
Interrupt vector loading test has failed.
Secondary DMA register test has failed.
Primary DMA register test has failed.
Primary interrupt mask register test has failed.
Secondary interrupt mask register test has failed.
Interrupt vector loading has failed.
Keyboard controller test has failed.
CMOS power failure and checksum checks have
failed.
CMOS configuration information validation has
failed.
Screen memory test has failed.
Screen retrace tests have failed.
Search for video ROM has failed.
Screen test indicates the screen is operable.
Timer tick interrupt test has failed.
Interval timer channel 2 test has failed.
RAM test has failed above address hex 0FFFF.
Time-of-Day clock test has failed.
Serial port test has failed.
Parallel port test has failed.
Math Coprocessor test has failed.
Comparison of CMOS memory size against actual has
failed.
Screen initialization has failed.
I2C bus has failed.
Action
Call for service.
Turn off the
server and then
restart the
server. If the
problem
persists, call for
service.
Chapter 7. Solving problems
111