SD Card Application Move
5.6.3 UNDO EXEC
"Undo Exec" (SP5873 2) restores an application to its original SD card. The application is
moved from Slot 1 to Slot 2.
1.
Turn off the main power switch.
2.
Remove the SD card slot cover.
3.
Insert the SD card that currently holds the application in Slot 1.
4.
Insert the original SD card to receive the restored application in Slot 2.
5.
Turn on the main power switch.
6.
Enter the SP mode and do SP5873 "Undo Exec."
7.
Follow the messages on the operation panel to complete the procedure.
8.
Exit the SP mode.
9.
Turn off the main power switch.
10. Remove both SD cards.
11. Insert the SD card with the restored application in Slot 1.
12. Turn on the main power switch.
13. Confirm that the application operates normally.
M001
5-96
SM