Ricoh M001 Service Manual page 87

Fatal kernel error
Due to a control error, a RAM
overflow occurred during system
processing. One of the following
messages was displayed on the
operation panel.
819 C
0x696e
0x766d
4361
Other
For more details about this SC code error, execute SP5990 to print an SMC report so you
can read the error code. The error code is not displayed on the operation panel.
Self-Diagnostic Error: CPU
820 D
The central processing unit returned an error
during the self-diagnostic test.
Self-diagnostic error 2: ASIC
The ASIC provides the central point
for the control of bus arbitration for
821 D
CPU access, for option bus and
SDRAM access, for SDRAM refresh,
and for management of the internal
bus gate.
For more details about this SC code error, execute SP5990 to print an SMC report so you
can read the error code. The error code is not displayed on the operation panel.
SM
System program defective
Controller board defective
Optional board defective
Replace controller firmware
init died
vm_pageout: VM is full
Cache Error
ASIC (controller board
defective)
4-9
Service Call Conditions
Controller board
defective
Software defective
M001