Machine Firmware Update - Ricoh M001 Service Manual

Firmware Update

5.4.3 MACHINE FIRMWARE UPDATE

Each program must be updated one a time. Follow the procedure below to update one
program.
1. Prepare a card that contains the required program.
2. If the machine is on, switch it off.
3. Remove the SD card cover ( x1).
4. Insert the SD card into Slot 2.
5. Turn on the power. The screen remains blank for about 20 to 30 sec., "Please Wait"
appears, then you will see "Engine", the first item available for selection.
The first selection "Engine" will appear about 1 min. after switching the power
on.
6. Scroll to the program to upgrade, then press [#Enter].
7. Press the [Online] to start the upgrade. You will see a series of messages. If you
selected "Engine", for example", you would see:
M001 5-88 SM