Ricoh M001 Service Manual page 121

1001 Bit Switch
005 Bit Switch 5
bit 0 DFU
bit 1 DFU
bit 2 DFU
bit 3 [PS] PS Criteria
Change the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4 Increase max number of the stored jobs
to 1000 jobs.
Enabled: Changes the maximum number of jobs that can be stored on the
HDD via Job Type settings to 1000. The default is 100.
bit 5 DFU
bit 6 Method for determining the image
rotation for the edge to bring on
Enabled: The image rotation will be performed as they were in the
specifications of older models for the binding of pages of mixed orientation
jobs. The old models are below:
-PCL-: Pre-04A models
bit 7 DFU
1003 Clear Setting
1004 Print summary
1005 Disp Version
SM
Initializes settings in the "System" menu of the user mode.
Prints the service summary sheet (a summary of all the controller
settings).
Displays the version of the controller firmware.
5-7
Printer Controller Service Mode
0 1
- -
- -
- -
Pattern3 Pattern1
Disable Enable
(100) (1000)
- -
Disable Enable
- -
M001