Ricoh M001 Service Manual page 143

HTTP Proxy
This SP setting determines if the proxy server is used when the machine
communicates with the service center.
5816 062
[0 or 1 / 0 / 1 /step]
0: HTTP Proxy not used
1: HTTP Proxy used
HTTP Proxy (Host)
This SP sets the address of the proxy server used for communication
between embedded RCG-N and the gateway. Use this SP to set up or
display the customer proxy server address. The address is necessary to set
5816 063
up embedded RCG-N.
Note: The address display is limited to 128 characters. Characters beyond
the 128 character are ignored.
This address is customer information and is not printed in the SMC report.
Proxy Port Number
This SP sets the port number of the proxy server used for communication
between embedded RCG-N and the gateway. This setting is necessary to
5816 064
set up embedded RCG-N.
Note: This port number is customer information and is not printed in the
SMC report.
Proxy/User Name
This SP sets the HTTP proxy certification user name.
Note:
5816 065
The length of the name is limited to 31 characters. Any character
beyond the 31st character is ignored.
This name is customer information and is not printed in the SMC report.
Proxy Password
This SP sets the HTTP proxy certification password.
5816 066
The length of the name is limited to 31 characters. Any character
beyond the 31st character is ignored.
SM
Printer Engine Service Mode
5-29 M001