Ricoh M001 Service Manual page 155

HDD Init.
5832
Initializes the hard disk and clears all data. Use this only if there is a hard
disk error.
Prog Checksum
5837
Displays the checksum for the engine firmware.
IEEE 802.11b
5840
Channel Max
Sets the maximum range of the bandwidth for the wireless LAN. This
5840 006
bandwidth setting varies for different countries.
[1 to 11(NA) or 13 (EU)/11 (NA) or 13 (EU)]
Channel Min
Sets the minimum range of the bandwidth for operation of the wireless LAN.
5840 007
This bandwidth setting varies for different countries.
[1 to 11(NA) or 13 (EU)/1 (NA) or 1 (EU)]
WEP key number
Determines how the initiator (SBP-2) handles subsequent login requests.
[00 to 11/00/1]
Note: There are four settings (binary numbers): 00, 01, 10, 11. These
5840 011
settings are possible only after the wireless LAN card has been installed.
00: 1st key. If the initiator receives another login request while logging in, the
request is refused.
01, 10, 11: 2nd, 3rd, 4th keys are "Reserved".
SM
Printer Engine Service Mode
5-41 M001