Ricoh M001 Service Manual page 165

5860 007 POP Before SMTP
5860 008 POP to SMTP Wait
5860 009 Rcv Protocol
5860 013 POP Auth Encrypt
5860 014 POP Srv Port No.
5860 015 IMAP Srv Port No
5860 016 SMTP Rcv Port No
SM
Printer Engine Service Mode
Enable/disable POP before SMTP. If the SMTP
server does not have authentication, you can
enable POP before SMTP, them POP
authentication is available (SP 5860 13)
[0-1/0/1]
0: Disable
1: Enable
When using POP before SMTP, this SP mode
determines the maximum wait time between
POP authentication and connection with SMTP.
Communication stops if this time is exceeded.
[0-3000/300]
This SP specifies POP3 protocol or switches off
receiving.
1: POP3
2: IMAP4
3: SMTP
If POP before SMTP is enabled, then you can
use this SP to enable or disable encryption
mode for POP authentication.
[0-2/0/1]
0: Automatic
1: No encryption
2: Encrypt
Input the POP server port number
This SP sets the number of the IMAP4 server
port.
[1 to 65535/143/1]
This SP sets the number of the port that receives
SMTP mail.
[1 to 65535/25/1]
5-51 M001