Convenience Closing Feature - Mercedes-Benz 2016 Metris Operator's Manual

Side windows
82
Opening and closing the side win-
dows
: Power window, left
; Power window, right
The switches on the driver's door take prece-
dence.
To open manually: press and hold the cor-
X
responding switch.
To open fully: press the switch beyond the
X
point of resistance and release it.
Automatic operation is started.
To close manually: pull the corresponding
X
switch and hold it.
To close fully: pull the corresponding switch
X
beyond the point of resistance and release it.
Automatic operation is started.
To interrupt automatic operation: press/
X
pull the corresponding switch again.
You can continue to operate the side windows
after switching off the engine or removing the
key. This function remains active for about
5 minutes or until you open a front door.
Convenience opening feature
You can ventilate the vehicle before you start
driving. To do this, the key is used to carry out
the following functions simultaneously:
to unlock the vehicle
R
to open the side windows
R
The convenience opening feature can only be
operated using the key. The key must be close to
the driver's door handle.
Convenience opening: point the tip of the
X
key at the driver's door handle.
Press and hold the % button until the side
X
windows are in the desired position.
To interrupt convenience opening: release
X
the % button.

Convenience closing feature

G
WARNING
When using the convenience closing feature,
parts of the body could be trapped in the clos-
ing area when a side window is being closed.
There is a risk of injury.
Observe the complete closing procedure
when the convenience closing feature is oper-
ating. Make sure that no body parts are in
close proximity during the closing procedure.
When you lock the vehicle, you can close the
side windows at the same time.
The key must be close to the driver's door han-
dle.
Observe the notes on the automatic reversing
feature for the side windows (
Convenience closing feature: point the tip
X
of the key at the driver's door handle.
Keep the & button pressed until all side
X
windows are fully closed.
Make sure that all side windows are closed.
X
To interrupt convenience closing feature:
X
release the & button.
Resetting the side windows
You must reset the side windows if there has
been a malfunction or an interruption in the volt-
age supply.
Turn the key to position 2 in the ignition lock.
X
Pull the two power window switches and hold
X
for approximately 1 second after closing the
side window.
If the side windows remain closed after the
X
button has been released, they have been
reset correctly. If this is not the case, repeat
the steps above for the open window.
page 81).
Y