Important Safety Notes - Mercedes-Benz 2016 Metris Operator's Manual

Display messages (vehicles without steering wheel buttons)
Display messages (vehicles without steering wheel buttons)
Introduction

Important safety notes

G
WARNING
If the instrument cluster has failed or malfunctioned, you may not recognize function restrictions
in systems relevant to safety. The operating safety of your vehicle may be impaired. There is a risk
of an accident.
Drive on carefully. Have the vehicle checked at a qualified specialist workshop immediately.
The on-board computer only shows messages or warnings from certain systems in the instrument
cluster display. You should therefore make sure your vehicle is operating safely at all times. If the
operating safety of your vehicle is impaired, stop the vehicle as soon as possible, paying attention
to road and traffic conditions. Then consult a qualified specialist workshop.
Display messages with graphic symbols are simplified in the Operator's Manual and may differ from
the symbols in the display. A warning tone sounds with certain display messages.
Please respond in accordance with the display messages and follow the additional notes in this
Operator's Manual.
You can hide low-priority display messages using the 3 button on the instrument cluster. The
display messages are then stored in the message memory. Rectify the cause of a display message
as soon as possible.
High-priority display messages cannot be hidden. These messages will continue to be shown in the
display until their cause has been eliminated.
Message memory
The on-board computer stores certain display messages in the message memory. You can call up
the stored display messages. Use the buttons in the instrument cluster.
Press È to select the message memory.
X
If there are display messages, the display shows the number of saved messages.
If there are no display messages, the display shows
Press 3 to scroll forwards through the display messages.
X
After the last saved display message, the display again shows the message memory start screen
with the number of saved messages.
Press È to exit the display messages and jump directly to the message memory start screen.
No No Messages Messages.
189
Z