Distance Menu - Mercedes-Benz 2016 Metris Operator's Manual

On-board computer (vehicles without steering wheel buttons)
172
120 120 km/h! km/h! (only for certain countries) max-
imum permissible speed exceeded
Display panel for display messages, menus
=
and menu bar
? Transmission position (
Fuel level
A
è ECO start/stop function
B
( page 123)
Y
C è Rear window wiper (
Display panel = shows the selected menu or
submenu and display messages.
Menu overview
The Settings Settings menu is only displayed when the
vehicle is stationary. You can think of the order
of the menus and functions as a circle. Press È
on the instrument cluster to scroll through the
menus.
If you scroll forward in the
3, the setting from the previous submenu or
function is adopted.
If you press È in a submenu, the submenu or
function is exited without adopting the setting.
The display then shows the start screen of the
Settings Settings menu.
Operation information can be found under
"Operating the on-board computer"
( page 171).
Y
Depending on the vehicle equipment, you can
call up the following menus, displays or func-
tions:
trip odometer and odometer display
R
( page 172)
Y
trip computer display (
R
current range display (
R
current fuel consumption display
R
( page 173)
Y
digital speedometer (
R
coolant temperature gage (
R
display messages in the message memory
R
( page 189)
Y
The following menus, displays and functions are
only displayed when the vehicle is stationary:
next service due date display (
R
tire pressure monitor restart (
R
Settings Settings menu for setting or activating/
R
deactivating driving and driving assistance
page 128)
Y
page 103)
Y
Settings Settings menu using
page 172)
Y
page 173)
Y
page 173)
Y
page 173)
Y
page 249)
Y
page 275)
Y
systems as well as display options
( page 174)
Y

Distance menu

Odometer
If the display shows the speed in the header, the
display beside trip odometer : also shows the
outside temperature.
You can switch the permanent display in the
header ( page 175).
Y
Using the buttons in the instrument cluster
To display: press and hold È until the dis-
X
play shows trip odometer : and odome-
ter ;.
To reset: press and hold 3 until the trip
X
odometer is reset to 0.0 0.0.
You can set the unit of measurement for the trip
odometer in the Distance Unit: Distance Unit:
( page 175).
Y
Trip computer menu
Trip computer
Distance
:
; Length of journey
= Average fuel consumption
Average speed
?
submenu