Setting The Language - Mercedes-Benz 2016 Metris Operator's Manual

On-board computer (vehicles without steering wheel buttons)
174
Settings menu
Introduction
Settings menu start screen
The vehicle must be stationary. Use the buttons
in the instrument cluster.
To display: press È to select the
X
menu.
The Settings Settings menu is only displayed when the
vehicle is stationary. You can think of the order
of the submenus and functions as a circle. Press
3 on the instrument cluster to scroll through
the menu, starting with its start screen and
select its submenus or functions successively.
If you scroll forward using 3, the setting from
the previous submenu or function is adopted.
If you press È in a submenu, the submenu or
function is exited without adopting the setting.
The display then shows the start screen of the
Settings Settings menu.
Depending on the vehicle's equipment, you have
the following options in the
Setting the language for the display messages
R
and displays ( page 174)
Y
Deactivating and activating ESP
R
( page 174)
Y
Setting the sensitivity of the rain sensor
R
( page 175)
Y
Activating and deactivating ATTENTION
R
ASSIST ( page 175)
Y
Selecting the permanent display in the header
R
of the display ( page 175)
Y
Setting the unit for distance, consumption
R
and speed displays (
Setting the time and date (
R
To reset settings to the factory settings:
X
turn the key to position 1 in the ignition lock
and press and hold 3 in the
for at least five seconds.
For safety reasons, not all functions are reset.
Settings Settings
Settings Settings menu:
®
page 175)
Y
page 176).
Y
Settings Settings menu
Setting the display language
The vehicle must be stationary. Use the buttons
in the instrument cluster.
Press È to select the Settings Settings
X
Press 3 to select the Language Language
X
The display shows the current language selec-
tion.
Press f or g to set the language for all dis-
X
play messages.
Press 3 to confirm.
X
The next submenu is shown in the display.
Deactivating/activating ESP
This menu is only available on vehicles without
the å button on the center console.
Please observe the important safety notes
®
under "ESP (Electronic Stability Program)"
( page 65).
Y
G
WARNING
If you deactivate ESP ® , ESP
bilizes the vehicle. There is an increased risk
of skidding and an accident.
Only deactivate ESP ® in the situations descri-
bed in the following.
It may be best to deactivate ESP
ing situations:
when using snow chains
R
in deep snow
R
on sand or gravel
R
Further information can be found under "ESP
(Electronic Stability Program)" (
The vehicle must be stationary and the engine
must be running. Use the buttons in the instru-
ment cluster.
Press È to select the Settings Settings
X
Press 3 to select the ESP ESP
X
The display shows the current status.
If the display shows the
With With Engine Engine On On message, confirm the mes-
sage with 3 and start the engine. The display
then shows the ESP ESP submenu and the ESP
status.
If the ESP ESP Inoperative Inoperative
the display, ESP is not available due to a mal-
function and is deactivated. If you confirm the
menu.
submenu.
®
® no longer sta-
® in the follow-
®
page 65).
Y
menu.
submenu.
Oper. Oper. Only Only Poss. Poss.
®
message is shown in