Overview of climate control systems
110
Control panel for automatic climate control
Sets temperature to the left and at rear (only for vehicles with rear air conditioning)
:
(
page 113)
Y
à Activates automatic mode – controls the climate control automatically (
;
=
¬ Defrosts the windshield (
K Increases the airflow (
?
Ä Sets the air distribution (
A
Display
B
C
h Activates/deactivates air-recirculation mode (
D
/ Switches operation to rear air conditioning (2nd menu level) (
Sets temperature to the right and at rear (only for vehicles with rear air conditioning)
E
(
page 113)
Y
0 Switches synchronization on/off (
F
¿ Switches the cooling with air dehumidification function on/off (
G
I Reduces the airflow (
H
I
¤ Switches the rear window defroster on/off (
J
Ì Switches the residual heat function on/off (
Information on 3-zone automatic cli-
mate control
Below, you can find a number of notes and rec-
ommendations to help you use automatic cli-
mate control optimally.
Activate automatic mode. All basic functions
R
are controlled automatically. The indicator
lamp in the à switch comes on when the
function is switched on.
Switch on the cooling with air dehumidifica-
R
tion function. The indicator lamp in the
¿ button comes on when the function is
switched on.
page 115)
Y
page 114)
Y
page 114)
Y
Y
page 115)
Y
page 114)
Y
page 116)
Y
page 117)
Y
Set the temperature to 72 ‡ (22 †) for both
R
sides. Only change the temperature in small
increments.
Only use the "Windshield defrosting" function
R
briefly until the windshield is clear again. The
indicator lamp in the ¬ button comes on
when the function is switched on.
Only use air-recirculation mode briefly, e.g. if
R
there are unpleasant outside odors or when in
a tunnel. The windows could otherwise fog up
as no fresh air is drawn into the vehicle in air-
recirculation mode. The indicator lamp in the
h button comes on when the function is
switched on.
page 113)
Y
page 116)
page 111)
Y
page 112)
Y