Show Syslog-Servers - Planet Networking & Communication WSGW-24020 User Manual

11-Aug-2002 15:41:43: %SYS-5-CONFIG_I: Configured from memory by console
11-Aug-2002 15:41:39: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet g0, changed
state to up
11-Aug-2002 15:41:39: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet g0, changed
state to down
11-Aug-2002 15:41:39: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet g1, changed
state to down
11-Aug-2002 15:41:39: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet g2, changed
state to down
11-Aug-2002 15:41:39: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet e3, changed
state to down

5.24.11 show syslog-servers

The show syslog-servers privileged EXEC command displays the syslog servers settings.
Syntax
show syslog-servers
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the syslog server settings.
Console# show syslog-servers
IP address Port
---------------- ------
192.180 14
192.180.2.285 14
Severity Facility
------------ ------------
Informational local
Warning local
-32
User's Manual of WGSW-24020/WGSW-48040
Description
----------------
7
7