Ip Https Authentication - Planet Networking & Communication WSGW-24020 User Manual

5.3.6 ip https authentication

The ip https authentication global configuration command specifies authentication methods for https servers. To return to the
default, use the no form of this command.
Syntax
ip https authentication method1 [method2...]
no ip https authentication
method1 [method2...] — Specify at least one from the following table:
Keyword Source or destination
local Uses the local username database for authentication
none Uses no authentication
radius Uses the list of all RADIUS servers for authentication
tacacs Uses the list of all TACACS servers for authentication
D
efault Configuration
The local user database is checked. This has the same effect as the command ip https authentication local.
Command Mode
Global Configuration mode
User Guidelines
The additional methods of authentication are used only if the previous method returns an error, not if it fails. To ensure that the
authentication succeeds even if all methods return an error, specify none as the final method in the command line.
Example
The following example configures https authentication.
console (config) # ip https authentication radius local
User's Manual of WGSW-24020/WGSW-48040
-15