Sntp Authentication-Key; Sntp Authenticate - Planet Networking & Communication WSGW-24020 User Manual

5.5.5 sntp authentication-key

The sntp authentication-key global configuration command defines an authentication key for Simple Network Time Protocol
(SNTP). To remove the authentication key for SNTP, use the no form of this command.
Syntax
sntp authentication-key number md5 value
no sntp authentication-key number
number — Key number (Range: 1 - 4294967295)
value — Key value (Range: Up to 8 characters)
Default Configuration
No authentication key is defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example defines the authentication key for SNTP.
cnsole(config)# sntp authentication-key 8 md5 ClkKey
console(config)# sntp trusted-key 8
console(config)# sntp authenticate

5.5.6 sntp authenticate

The sntp authenticate global configuration command grants authentication for received Network Time Protocol (NTP) traffic
from servers,. To disable the feature, use the no form of this command.
Syntax
sntp authenticate
no sntp authenticate
This command has no arguments or keywords.
Default Configuration
No authentication
Command Mode
Global Configuration mode
User's Manual of WGSW-24020/WGSW-48040
-17