Ip Igmp Snooping Mrouter; Ip Igmp Snooping Host-Time-Out - Planet Networking & Communication WSGW-24020 User Manual

Command Mode
Interface configuration (VLAN) mode
User Guidelines
IGMP snooping can only be enabled on static VLANs.
Example
The following example enables IGMP snooping on VLAN 2.
Console (config)# interface vlan 2
Console (config-if)# ip igmp snooping

5.9.3 ip igmp snooping mrouter

The ip igmp snooping mrouter interface configuration command enables automatic learning of multicast router ports in the
context of a specific VLAN. To remove automatic learning of multicast router ports, use the no form of this command.
Syntax
ip igmp snooping mrouter learn-pim-dvmrp
no ip igmp snooping mrouter learn-pim-dvmrp
Default Configuration
Automatic learning of mrouter ports is enabled.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
Multicast router ports can be configured statically by the bridge multicast forward-all command.
Example
The following example enables automatic learning of multicast router ports on VLANs.
Console (config) # interface vlan 2
Console (config-if)# ip igmp snooping mrouter learn-pim-dvmrp

5.9.4 ip igmp snooping host-time-out

The ip igmp snooping host-time-out interface configuration command configures the host-time-out. If an IGMP report for a
multicast group was not received for a host-time-out period, from a specific port, this port is deleted from the member list of that
multicast group. To reset to default host-time-out use the no form of this command.
User's Manual of WGSW-24020/WGSW-48040
-21