Resending A Document That Encountered An Error - Canon L250 User Manual

Sending Faxes

Resending a Document that Encountered an Error

If you get an error signal when sending a document from memory, you can try resending the document
to the same destination without having to scan it again.
Make sure that the ERASE FAILED TX setting in the TX SETTINGS is set to OFF.
See page 12-9 for details on changing the setting.
When the AUTO REDIAL setting in the TX SETTINGS is set to OFF, a document
that failed to be sent is also considered an error document.
1
Press FUNCTION, then MEMORY REF.
2
Use or to select MEM. RETRANSMIT.
3
Press START/COPY.
4
Use or to select the TX/RX number of the
document you want to resend.
¶ If you are not sure of the TX/RX number of the
document you want to resend, print the list of
documents stored in memory. See page 5-35 for
details.
5-38
FUNCTION MEMORY REF
FUNCTION
MEMORY REFERENCE
DELETE DOCUMENT
MEM. RETRANSMIT
TX/RX NO.
TX/RX NO
_ 0 001
_ 0 003