Stylus Pro5000
4.2.2 Housing Front Unit Removal
1. Remove "Housing Upper".(See Section4.2.1)
2. Remove "Cable, Panel" connecting to "Board Assembly, Panel" from
connector on the board.
3. Remove 2 CBS screws(3x6) securing "Grounding plate, Panel" to
"Frame, Paper Eject". (Refer to Figure4-8)
4. Release 2 hooks securing "Housing Front Unit" located front bottom side
of "Housing Lower". (Refer to Figure4-9)
5. Remove ""Housing Front Unit".
Rev.A
Chapter4 Assembly and Disassembly
2 CBS screws(3x6)
"Cable, Panel"
"Grounding Plate, Panel"
"Housing Front Unit"
Figure 4-8. Housing Front Unit Removal
Hook under "Housing
Lower"(located at both right
and left side)
Figure 4-9. Discharge Brush Removal
4-5