Conditions For Combined Functions - Minolta Di620 Operator's Manual

7-12
3. Function Combination Matrix

Conditions for Combined Functions

: The combination is possible.
: Either of the functions which is set first takes precedence.
: Either of the functions which is set last takes precedence.
: One of the functions must be canceled before a copy cycle can be initiated.
: The combination is disabled in 1
A : The combination is impossible if the Paper Size is input by custom size and the function set first
takes precedence.
B : The combination is only available for the extra copies.
When OHP Interleaving is selected, 2
changed to 1 1[2-in-1] or 1
C : The combination can make OHP copies.
D : Shift-for-Margin and Half-Fold cannot be combined. (The function set first takes precedence.)
E : The Mixed Original Detection mode is valid regardless of whether Mixed Orig. Detect is turned ON
or OFF.
F : The Mixed Original Detection mode is valid for Auto Detect and not valid for Size Input regardless
of whether Mixed Orig. Detect is turned ON or OFF.
G : Booklet Creation and Back Cover cannot be combined. (Booklet Creation takes precedence.)
H : The zoom ration is automatically changed to Full Size.
I : No zoom ratios can be stored in memory in the Interrupt mode.
J : The function set last takes precedence. (Center Staple is automatically selected.)
K : Auto Size is automatically selected.
L : 2-Point Side Staple is automatically selected.
M : The functions cannot be combined only for Separation. (The function set first takes precedence.)
N : When the copier is equipped with an FN-3, the function set last takes precedence (and Center Staple
is automatically selected). When the copier is equipped with an FN-102/FN-502, the function set
first takes precedence.
P : The combination is not possible only if Auto Paper is used, and Staple is automatically canceled.
(The combination becomes possible when it is further combined with Z-Fold.)
Q : The combination is not possible only if Auto Paper is used with an FN-3 installed, and Staple is
automatically canceled. (The combination becomes possible when it is further combined with Z-
Fold.) When an FN-102/FN-502 is installed, the combination is not possible only if the document
loaded contains pages of different widths with Auto Paper used. (Staple is automatically canceled.)
R : The combination is not possible only if the finished size of Z-Fold differs from the size of the cover
or interleaf. The function set first takes precedence. (Neither the cover nor interleaf can be folded in
Z-fold.)
2 Mode and the function set first takes precedence.
2[2-in-1] or 2 2[4-in-1] Mode will be automatically
1 [4-in-1] Mode.