Meter Count And Toner Replenisher Meter Count; Toner Replenisher - Minolta Di620 Operator's Manual

4. Meter Count and Toner Replenisher
Meter Count
Touching Meter Count
Total Counter
Shows the total number of copies made since the
installation of the copier.
Size Counter
Shows the number of copies made on copy paper
of a preset size. (The size will be set by your Tech.
Rep.)
2-Sided Total
Shows the number of 2-sided copies made.
2-Sided Size
Shows the number of 2-sided copies made on copy
paper of a preset size (the same size as set for Size
Counter).

Toner Replenisher

Touching Toner Replenisher
The copier tends to exhaust the supply of toner rapidly when making a number of copies from an original
with dark solid areas such as a photo. As a result, the image density of the copy will become lighter. In
such a case, you can use Toner Replenisher to regain the normal image density quickly.
NOTES
• Do not turn OFF the Power Switch or open the Front Door while the copier is replenishing toner.
• Toner is not replenished if the image density is sufficiently high.
• The toner replenishing sequence ends automatically.
allows you to check the total count of each of the following seven counters.
sets the copier into the auxiliary toner replenishing mode.
Account Total
Shows the total number of copies made by the
active accounts.
Printer Total Counter
Shows the total number of prints produced by the
copier configured as a printer.
Printer Size Counter
Shows the number of prints produced by the copier
configured as a printer on paper of a size preset for
Size Counter.
4-13