Precautions When Using A Finisher - Minolta Di620 Operator's Manual

Finisher FN-102
1
Elevator Tray
2 Top Offset Tray
3
Misfeed Clearing Guide : Open to clear misfed paper.
4 Stapler Cover
5
Lock Release Lever
Mailbin Finisher FN-502
6
Mail Bins
7
Elevator Tray
8
Top Offset Tray
9
Misfeed Clearing Guide : Open to clear misfed paper.
10
Stapler Cover
11
Lock Release Lever
Finisher FN-3
12
Finisher Door
13 Bottom Offset Tray
14 Manual Staple Tray
Cover
15
Top Offset Tray
16
Grip

Precautions When Using a Finisher

Do not place an
object here.
: Receives sorted paper by shifting.
: Receives plain paper or exclusive paper fed out.
: Open to replace the staple cartridge.
: Hold to slide the Finisher away from the copier.
: Receives outputs fed out in finishing mode.
: Receives sorted paper by shifting.
: Receives plain paper or exclusive paper fed out.
: Open to replace the staple cartridge.
: Hold to slide the Finisher away from the copier.
: Open to replace the Staple Cartridge.
Open to clear a paper misfeed.
: Receives sorted/stapled copy sets or grouped copy stacks.
: Open to load documents for manual stapling or to clear a paper misfeed.
: Receives sorted copy sets or grouped copy stacks.
: Grasp and press here to slide the Finisher away from the copier to clear a
misfeed or other service job.
1155O720AA
3. Copier Parts and Accessories
p. 5-8
p. 5-12
NEVER place an object under the Bottom
Offset Tray or Elevator Tray. Anything that is
placed under the Bottom Offset Tray or
Elevator Tray can interfere with the tray when
it lowers after a copy set has been fed onto it,
which results in a malfunction.
2-11