Dvox Set Mode - Icom IC-7200 Advanced Instructions

Previous view
6
FUNCTIONS FOR TRANSMIT
VOX function (Continued)
■
D VOX Set mode
Hold down
q VOX
mode.
[M-CH] to select "VoX GAIN."
Rotate
w
While speaking into the microphone at your normal
e
voice level, rotate [DIAL] to the point where the
transceiver continuously transmits.
[M-CH] to select "ANTI-Vox."
Rotate
r
During receive, rotate
t
VOX gain to the point where the transceiver does
not switch to transmit due to received audio from
the speaker, or background noise.
[M-CH] to select "VoX DELY."
Rotate
y
Rotate [DIAL] to adjust the VOX delay for a conve-
u
nient interval before returning to receive.
Push to exit the VOX Set mode.
i
VOX
VOX GAIN
Adjusts the VOX gain for the VOX (Voice-Operated
Transmission) function. Higher values make the VOX
function more sensitive to your voice.
• Hold down
M-CL
value.
ANTI-VOX
Adjusts the ANTI-VOX gain for the VOX (Voice-Oper-
ated Transmission) function. Higher values make the
VOX function less sensitive to receiver output audio
from a speaker or headphones.
• Hold down
M-CL
value.
VOX DELAY
This item adjusts the VOX (Voice-Operated Transmis-
sion) delay time. VOX Delay is the amount of time the
transmitter stays on after you stop speaking.
Adjust the delay time between 0 and 2.0 seconds, in
0.1 second steps.
• Hold down
M-CL
value.
for 1 second to enter the VOX Set
[DIAL] to adjust the anti-
for 1 second to return to the default
for 1 second to return to the default
for 1 second to return to the default
0.2 seconds (default)
6-3
[DIAL] [M-CH]
VOX
VOX Gain
50% (default)
50% (default)
50% (default)
9
28