User Set Mode; Scrambler Function; Emergency Transmission - Icom IC-F6020 Series Instruction Manual

■ User Set mode

If the transceiver has [User Set Mode] assigned to it, you
can "customize" the transceiver operation to suit your
preferences and operating style.
Entering the User Set mode:
q Hold down [User Set Mode] for 1 second to enter the User
Set mode.
w Push [P0] to select the appropriate item.
Then push [P2] or [P3] to set the desired value or option.
• In the User Set mode, the selectable items are preset by your
dealer. The presetable items are Backlight, Beep, Beep Level,
SQL Level, AF Min Level, Mic Gain, Horn, Battery Voltage,
Signal Moni and Lone Worker.
e Hold down [User Set Mode] for 1 second again to exit the
User Set mode.

■ Scrambler function

The voice scrambler function provides private communication
between stations.
The optional Rolling or Non-rolling type can be selected.
q Push [Scrambler] to turn the scrambler function ON.
• " " (Scrambler indicator) is displayed.
w Push [Scrambler] again to turn the scrambler function
OFF.
• " " disappears.

■ Emergency transmission

The emergency call can be performed using [Emergency]. (p. 5)
When [Emergency] is pushed for the specified period of
time, the DTMF or 5-Tone emergency signal is transmitted
once or repeatedly on the emergency channel depending
on the channel. However, when no emergency channel is
specified, the signal is transmitted on the previously selected
channel.
If you want to cancel the emergency call, hold down the key
again before transmitting the call.
You can also make an emergency call with the MDC 1200
signaling system. (p. 13)
2
BASIC OPERATION
2
11