Selecting The Vfo And Memory Modes; Understanding The Vfo Mode And The Memory Modes - Icom IC-7200 Advanced Instructions

Previous view
3
BASIC OPERATION

■ Selecting the VFO and memory modes

V/M
Push to toggle between the VFO and the
➥
memory modes.
D Understanding the VFO mode and the memory modes
VFO MODE
Each VFO display shows a frequency and operat-
ing mode. If the frequency or mode is changed, the
VFO automatically memorizes the new frequency or
mode.
If another VFO or memory channel is selected, when
the original VFO is selected again, the last used fre-
quency and mode of the selected VFO appears.
MEMORY MODE (pp. 7-2 –7-6)
Each memory channel shows a frequency and oper-
ating mode like a VFO. Even if the frequency or mode
is changed, the memory channel does not memorize
the new frequency or operating mode.
Even if the frequency and mode are changed in the
memory, then another memory or VFO is selected,
when the first memory is selected again, its original
programmed frequency and mode appear.
Changed frequency (14.123 MHz) appears.
VFO is selected.
The frequency is
changed.
Memory mode is
selected.
VFO is selected
again.
3-3
[EXAMPLE]
Changed frequency (14.123 MHz) appears.
Changed frequency (14.123 MHz) does not appear and
memorized frequency (14.100 MHz) appears instead.
VFO is selected.
The frequency is
changed.
Memory mode is
selected.
VFO is selected
again.
Memory channel 1
is selected.
The frequency is
changed.
Another memory
channel is selected.
Memory channel 1
is selected again.
Chan
memo