Table of Contents
Advertisement
4
SET MODE
■ Using the Set mode
You can use the Set mode to set infrequently changed
values or function settings. The transceiver has two types
of Set modes, as shown below.
D Using the Basic Set mode
Example: Selecting a 20 kHz tuning step
1.
Push [SET] to enter the Set mode.
• A Set mode item is displayed.
2.
Push [SET] several times to select "tS."
3.
Rotate [DIAL] to select "20.0."
4.
Push [V/M/C] or [ENT] to exit the Set mode.
D Using the Initial Set mode
Example: Setting the Auto Power OFF Timer to
30 minutes
1.
Rotate [VOL] counter-clockwise to turn OFF the
transceiver.
2.
While holding down [SET], rotate [VOL] clockwise to
turn ON the transceiver.
• An Initial Set mode item is displayed.
3.
Push [SET] several times to select "AP OFF."
4.
Rotate [DIAL] to select "30."
5.
Push [V/M/C] or [ENT] to exit the Initial Set mode.
13
Advertisement
Table of Contents
