Activating The Noise Blanker; D Setting The Noise Blanker Level And Width - Icom IC-7200 Advanced Instructions

Previous view
5
FUNCTIONS FOR RECEIVE

■ Activating the Noise blanker

The noise blanker eliminates pulse-type noise such
as from car ignition systems.
NB
Push to turn the noise blanker ON or OFF.
➥
• " " appears when the NB function is ON.
When using the noise blanker, received signals
may be distorted if they are excessively strong, or
the noise type is other than a pulse type. Nearby
strong signals can also cause the noise blanker to
create distortion. Turn OFF the noise blanker func-
tion, or adjust the noise blanker level to a shallower
setting in this case. (see below)

D Setting the noise blanker level and width

NB
Hold down
q
blanker Set mode.
• The noise blanker is turned ON and "
[M-CH] to select the item.
Rotate
w
Rotate [DIAL] to adjust the level and/or width.
e
• Hold down
M-CL
value.
Push to exit the noise blanker Set mode.
r NB
NB LEVEL
Adjusts the noise blanker attenuation level between
0% and 100%, in 1% steps.
NB WIDTH
Adjusts the noise blanker blank width to match the
pulse width. The blank width can be adjusted from
1% to 100%, in 1% steps.
for 1 second to enter the noise
" appears.
for 1 second to return to the default
Appears
5-7
Appears
[DIAL] [M-CH]
50% (default)
50% (default)