D Selecting The 1 Hz And 10 Hz Tuning Steps; Dts Switch Flow Chart - Icom IC-7200 Advanced Instructions

Previous view
3
BASIC OPERATION
Frequency setting (Continued)
■

D Selecting the 1 Hz and 10 Hz tuning steps

When the Quick tuning step icon, "Z," disappears, ro-
tating [DIAL] changes the frequency in increments of
1 or 10 Hz.
NOTE: The frequency is changed in 50 Hz steps
when the [UP]/[DN] switches of the microphone
are used for the frequency setting (when the Quick
tuning function is not selected, "
Hold down TS
➥
1 Hz and 10 Hz step settings.
• When the 1 Hz step is selected, the 1 Hz digit appears in
the frequency display; when the 10 Hz step is selected, the
1 Hz digit disappears from the frequency display.
• Rotating [DIAL] changes the frequency in 1 Hz or
10 Hz tuning step.
switch flow chart
D
TS
Tuning step set mode
" disappears.)
Z
for 1 second to toggle between the
10 Hz tuning
Push
TS
The Quick tuning
function is ON.
Quick step tuning (0.1 kHz –10 kHz)
Push
TS
10 Hz tuning
Rotating [DIAL] changes the
frequency in 10 Hz steps.
Rotating [DIAL] changes the
frequency in 1 Hz steps.
Hold down
for 1 second
Push
TS
Appears
Hold down
3-8
1 Hz tuning
Appears
[DIAL]
Appears
1 Hz tuning
1 second
Hold down
TS
for 1 second