Icom IC-7200 Advanced Instructions page 93

Previous view
8
SCAN OPERATION
■ Scanning Memory channels (Memory mode)
A Memory scan searches for signals through memory
channels 1 to 199. Blank (unprogrammed) memory
channels are skipped.
Push V/M to select the Memory mode.
q
Close the squelch with the
w
Push to start the scan.
e
SCAN
• " " appears while scanning.
When the scan detects a signal, the scan either
r
stops or pauses, depending on the resume set-
ting.
To cancel the scan, push
t
• Rotating [DIAL] during scan also cancels the scan.
NOTE: Two or more different memory channels
must be programmed for a memory scan to start.
[RF/SQL] control.
.
SCAN
[RF/SQL]
8-5
Appears
[DIAL]