Time Date Setup − Digital; Digital Recorder Controls; Login As Engineer; Go To Operator Screen - Miller Electric IH Owner's Manual

6-2-2. Time Date Setup − Digital

6-2-2-1. Digital Recorder Controls

7
8
9
10
3
2
1

6-2-2-2. Login As Engineer

1. Touch top left corner (Logged Out) or (User).
2. Touch Blue text (pull down menu) next to User.
3. Touch Engineer.
4. Touch Password field.
5. Touch Numeric.
6. Touch 1, then 0, and finally Ok. "Engineer" will appear in top left corner of display.

6-2-2-3. Go To Operator Screen

1. Touch the Menu
2. Touch Operator.

6-2-2-4. Locale Setup

1. Touch System.
2. Touch Locale.
3. Touch pull down next to Country.
4. Touch appropriate country.
5. Touch pull down next to Time Zone.
6. Touch appropriate time zone (i.e. CST Central). See "http://www.timeanddate.com" for additional information.
7. Set DST (Daylight Savings Time) if applicable. Place an "X" in the box next to "Use Summertime (DST)" to
enable this option.
key in bottom right corner to open Root Menu.
Y Keep all panels, doors, and
covers closed and secure
during programming.
1. Page Up
2. Page Down
3. Left
4. Right
5. Option
6. Menu
Additional keys that appear as
4
needed for specific applications are
5
as follows:
6
7. Close Folder
8. Open Folder
9. Left Cursor
10. Right Cursor
OM-203 185 Page 17