Restoring Recorder Configuration From A Floppy Disk; (For 5100 Digital Recorder); Load File; Date Setup - Miller Electric IH Owner's Manual

7-3. Restoring Recorder Configuration From A Floppy Disk

(For 5100 Digital Recorder)

Login as Engineer.
Touch top left corner (Logged Out) or (User).
Touch Blue text (pull down menu) next to User.
Touch Engineer.
Touch Password field.
Touch Numeric.
Touch 1, then 0, then Ok.
7-3-1.

Load File

Insert digital recorder configuration disk into recorder.
Touch key in bottom right corner to open Root Menu.
Touch Operator.
Touch Save/R.
Touch Restore.
Touch field next to File Name.
Touch up folder.
Touch \Floppy\ (Highlights yellow).
Touch down folder.
Touch the desired 5100 Config file (####.uhz).
Touch Open.
7-3-2.

Date Setup

1. Touch System.
2. Touch Locale.
3. Touch pull down next to Country.
4. Touch appropriate country.
5. Touch pull down next to Time Zone.
6. Touch appropriate time zone (i.e. CST Central). See "http://www.timeanddate.com" for additional information.
7. Set DST (Daylight Savings Time) if applicable. Place an "X" in the box next to "Use Summertime (DST)" to
enable this option.
NOTE
8. Touch Apply.
OM-203 185 Page 50
In general, for those locations that observe DST:
DST begins at 2:00 am on the first Sunday in April.
DST ends at 2:00 am on the last Sunday in October.
See "http://deil.lang.uiuc.edu/web.pages/holidays/DST.html for exceptions.